PH: 319-535-2130, Sales@PrimoSlings.com


Official PayPal Seal
Home > Wire Rope Slings > Wire Rope Bridle Slings - 2 Leg
Choose a sub category:
1/4" Double Leg Wire Rope Slings 3/8" Double Leg Wire Rope Slings
1/2" Double Leg Wire Rope Slings 5/8" Double Leg Wire Rope Slings
3/4" Double Leg Wire Rope Slings 7/8" Double Leg Wire Rope Slings
1" Double Leg Wire Rope Slings
Bridle slings are lifting slings for rigging and lifting that require a lift by 2 or more anchor points.  The two leg bridle sling is constructed with flemish spliced eyes swaged with a carbon sleeve for 100% wire rope efficiency.  The lengths you see below are simply common lengths for purchase.  Custom wire rope slings and leg lengths are available upon request at sales@primoslings.com!
1/4" Double Leg Wire Rope Slings 3/8" Double Leg Wire Rope Slings
Ratings for Lifting:
60 deg Angle - 1.1 Ton
45 deg Angle - .91 Ton
30 deg Angle - .65 Ton

Hooks - 1 Ton Alloy
Oblong - 1/2" x 2-1/2" x 5"

more info
Ratings for Lifting:
60 deg Angle - 2.5 Ton
45 deg Angle - 2.0 Ton
30 deg Angle - 1.4 Ton

Hooks - 2 Ton Alloy
Oblong - 1/2" x 2-1/2" x 5"
more info
1/2" Double Leg Wire Rope Slings 5/8" Double Leg Wire Rope Slings
Ratings for Lifting:
60 deg Angle - 4.4 Ton
45 deg Angle - 3.6 Ton
30 deg Angle - 2.5 Ton

Hooks - 3 Ton Alloy
Oblong - 3/4" x 2-3/4" x 5-1/2"
more info
Ratings for Lifting:
60 deg Angle - 6.8 Ton
45 deg Angle - 5.5 Ton
30 deg Angle - 3.9 Ton

Hooks - 4.5 Ton Alloy
Oblong - 1" x 3-1/2" x 7"
more info
3/4" Double Leg Wire Rope Slings 7/8" Double Leg Wire Rope Slings
Ratings for Lifting:
60 deg Angle - 9.7 Ton
45 deg Angle - 7.9 Ton
30 deg Angle - 5.6 Ton

Hooks - 7 Ton Alloy
Oblong - 1-1/4" x 4-3/8" x 8-3/4"
more info
more info
1" Double Leg Wire Rope Slings
Ratings for Lifting:
60 deg Angle - 17 Ton
45 deg Angle - 14 Ton
30 deg Angle - 9.8 Ton

Hooks - 10 Ton Alloy
Oblong - 1-1/2" x 5-1/4" x 10-1/2"
more info
A wire rope bridle sling can have multiple legs as long as they can fit on the curvature of the oblong at the top. The legs of the bridle slings are usually the same length but can be made of variant lengths for certain rigging and lifting applications. The wire rope bridles come in rope diameters of 1/4" to 1" and are tagged and rated accordingly. Metal tags are available upon request for an extra fee. Bridle slings can also be proof tested with results recorded for an additional fee also (certificates of conformance can be supplied at no additional charge).

Bridle slings are not rated for the choker, vertical or basket hitches as they are not used in the same manner for lifting. The distance between anchor points will cause the sling lengths to be lifted at an angle. The sharper the angle, the weaker the sling rating. Bridles are rated at 30, 45, and 60 degrees. They should never be lifted with if the angle from the top of the object to the sling leg is less than 30 degrees.

The hooks at the bottom of the legs of the bridles can vary also. Our wire bridles typically come with sling hooks with a safety latch but can also be made with foundry hooks, grab hooks, and self-locking hooks also. The wire rope can be used in environments too harsh for nylon slings or polyester slings with smaller diameters for tighter spots. Common lengths are on the website but we can make them to custom lengths, and mismatched ends if desired. For any questions, please feel free to contact our sales team at 319-535-2130.